PMST WAVE: The PHYSIO magneto & NIRS & ShockWave 3in1 machine for musculoskeletal disorders.
PMST WAVE Overview
Extracorporeal Magnetotransduction Therapy (EMTT) with the PMST WAVE for regeneration and rehabilitation of musculoskeletal disorders:
Technical Specifications
| PHYSIO magneto | |
| Oscillation Frequency (ST mode) | 1000~3000 Hz |
| Oscillation Frequency (MT mode) | 1~100 Hz |
| Field Strength At the Coil | 4 T |
| Field Strength At 4cm Distance | 0.4 T |
| Performance of the Field | 92 T/S |
| NIRS | |
| Near Infrared Wavelength | 940 NM / 660 NM / 620 NM |
| Power | 3200 MW |
| ShockWave | |
| Frequency | 1-21 Hz |
| Energy | 1-6 Bar |
| Therapeutic Penetration Depth | 0-60mm |
| Bullet Lifetime | Up to 3 million shocks |
| Machine | |
| System Water Capacity | 2.5 L |
| LCD Touchscreen | 10.4 inch |
| Voltage | 110 V or 220 V |
| Output Power | 1200 W |
| Package Size | 108 x 58 x 60 CM |
| Package Weight | 80 KG |
Packing List
| Host | 1 unit |
| Magneto Handle | 1 pc |
| NIRS Handle | 1 pc |
| ShockWave Handle | 1 pc |
| ShockWave Tip | 1 set (6 pcs) |
| ShockWave Bullet & Tube | 2 bullets, 2 tubes (1 bullet and 1 tube already installed in handle) |
| Silicon Connector | 1 pc |
| Holding Arm | 1 pc |
| Power Line | 1 pc |
| User Manual | 1 pc |
| Other Accessories | 1 set |
Customer Questions & Answers
Yes, it’s ok to put your logo on machine and welcome screen even if you just order one unit. Price list for branding machine as below:
- Add logo on welcome screen (software): Free
- Add logo on machine body: 50 USD per unit
No, the applicator (handpiece) is not consumables, can be used for years.
Yes, it can be replaced easily by yourself with the replacing video we offered.
Not painful at all. But a slight increase in bone ache and a little bit of numb.
Regular maintenance is not required. But need to replace water once a month. And drain water away if you will not use the machine for a long time.
EMTT is a non-invasive, evidence-based procedure developed specifically for the treatment of degenerative joint disorders, acute and chronic pain, and sports injuries.
EMTT uses high-energy magnetic pulses transmitted to the affected areas of the body. Due to the high oscillation frequency, EMTT enables a high penetration depth and treats a wide range of musculoskeletal conditions.
EMTT can address the following musculoskeletal conditions:
- Degenerative Joint Disorders
- Chronic and Acute Pain
- Overuse sports and work-related injuries
EMTT is a very comfortable outpatient procedure that can be performed right in our office. The handpiece is positioned over the area of pain while you remain fully clothed – direct skin contact is not necessary. The procedure does not require anesthesia, requires a minimal amount of time, and allows you the ability to immediately bear weight (i.e. walk), and return to normal activity shortly following the procedure.
Treatment sessions take approximately 5-20 minutes depending on the condition. Treatments may be done 1-2 times per week with up to 10 sessions in a 5 week period, depending on the diagnosis. Many patients report a significant improvement in their symptoms after just a few sessions. EMTT is often combined with shockwave therapy for more powerful effects.
Yes, EMTT treatment is safe. This technology is currently used around the globe. A wealth of medical experience, state-of-the-art engineering and optimal quality have been built into each EMTT device, and extensive clinical studies and tests have confirmed its safety and efficacy.
EMTT has virtually no risks. Possible side- effects may include discomfort during treatment or reddening.
Patients with the following should not receive EMTT treatment:
- Pacemakers and other sensitive electronic implants
- Implants, if not safe for MRI
- Pregnancy
