Popular Models
Popular Models Comparison
| HIEMS MAX4 Light | HIEMT MAX3 Light | |
|---|---|---|
| Power | 1700 VA | 1700 VA |
| Max. Output Power | 9 Tesla | 9 Tesla |
| Max. Working Frequency | 135 Hz | 135 Hz |
| Voltage | 100 ~ 240 V | 100 ~ 240 V |
| Handpieces Working Mode | Independently | Independently |
| Recharging System | Built-in | Built-in |
| Pulse Width | 360 µs | 360 µs |
| Electromagnetic Coil Diameter | 129 mm | 129 mm |
| Style | Portable | Portable |
| Software | Simplified | Simplified |
| LCD Touchscreen Size | 8 inches | 8 inches |
| Display Languages | English, Spanish, Italian, Chinese | English, Spanish, Italian, Chinese |
| Applicators | 2 abdominal handpieces, 2 arms handpieces, | 2 abdominal handpieces, 2 arms handpieces, |
| Cooling System | Air cooling | Air cooling |
| Start/Pause Button | Available on handpiece | Available on handpiece |
| Handpiece Connector Type | Plug-in | Plug-in |
| EMS Working Intensity | 1-15 | – |
| EMS Working Mode | M1: EMS and EMT work simultaneously M2: EMS and EMT work by turns | – |
| Learn more > | Learn more > | |
HIEMT PRO II
Overview
HIEMT PRO II, the professional High Intensity Electromagnetic Muscle Trainer, which helps women and men lose fat and gain muscle simultaneously at 6 body parts: abdomen, buttocks, thighs, calves, biceps, triceps.
100 ~ 230 V wide range of voltages, always working fine all over the world
Maximum working frequency added up to 120Hz
Double Sculpting – Two handpieces work independently with different working parameters for different person or different areas
Recharging System – Automatically generating a code, which controls the usage count and time. Used for machine’s rental, cooperative management, membership usage after code purchase.
10.2 inches LCD touch screen
2 Working modes: Auto & Manual
Pain-free, Non-surgical, Non-invasive
Supramaximal Magnetic Energy – The high intensity magnetic energy covers big skeletal muscles of the human body, and this high level energy allows musle responds with a deep remodeling of its inner structure
Stronger Stimulation – Double layer coil generates deeper and stronger high intensity electromagnetic effects
Liquid Cooling Technology – Equipped with liquid-cooled system that allows long time operation without any overheat issue
High Efficacy – One 30 minutes session equals 30000 sit-ups, gain muscle and lose fat at the same time
Double ElectroMagnetic Handpieces
Design and construction are based on a high level of ergonomy to be user-friendly for patients and doctors
Liquid-cooled applicators that allows long time operation without any overheat issue
Two applicators to treat all of your concerns
Screen Interface
10.2 inches LCD touchscreen with user-friendly and simple interface
Two handpieces’ working intensity can be separately adjusted
9 different pre-built display languages
Technical Specs
| Input Power | 1500VA |
| Output Power | 0-9 Tesla (+/- 20%) |
| Screen | 10.2 inches LCD touchscreen |
| Display Languages | English, Spanish, Japanese, Italian, French, German, Arabic, Greek, Chinese |
| Pulse Width | 360 µs |
| System Cooling | Liquid cooling |
| Electromagnetic Coil Diameter | 129 mm |
| Working Mode | Auto, Manual |
| Working Time | 1-30 minutes |
| Working Intensity | 1%-100% |
| Working Frequency | F1 (1-80Hz), F2 (1-120Hz), F3 (1-50Hz) |
| Voltage | 100 – 230 V (wide range) |
| Fuse | FL5*20 T15AL250V (220V), RT28-32(RO15)20A 500V (110V) |
Packing List
| Host | 1 set |
| Handpiece | 2 pcs |
| Power Supply Line | 1 pc |
| User Manual | 1 pc |
| Accessories Frame | 2 pc |
| Bandage (0.75m) | 2 pc |
| Bandage (1.5m) | 1 pc |
| Hexagonal Screw Wrench | 1 pc |
How HIEMT Works
HIEMT is based on high-intensity focused electromagnetic energy, penetrates through the skin to target fat layers and the muscle layer, inducing powerful involuntary muscle contractions.
The body’s response to these contractions is to strengthen its muscle fibers, resulting in improved muscle gain and fat lose.
After treatments, abdomen, buttocks, thighs, calves, biceps and triceps are firmer and have a more defined and toned appearance.
Customer Questions & Answers
Notice: The machine is water cooling type and is required to be used after adding water. Please add distilled water. Do not use tap water!
The method of water adding and drainage in below videos is applicable to: HIEMT PRO, HIEMT PRO II and HIEMT Light.
Water adding videos as below:
Step 1: Connect pipe with funnel to inlet, connect the short pipe to overflow.
Step 2: Add water via funnel until water overflow.
Step 3: Turn on machine, setting—liquid setting—start countdown for 30 seconds. After countdown is over, add water again until water overflow.
Water drainage videos as below:
Step 1: Disconnect the pipe inside machine, connect one pipe to outlet to drain water away. Notice: To drain water away completely, another pipe is required to connect with inlet or overflow, to create the air pressure circulation.
Step 2: Connecting the pipe inside machine with metal ring and insulating tape.
Yes, all our machines have CE certificates, which can be offered any time you need.
100 ~ 240 V wide range of voltages, always working well all over the world.
The machine will be assembled well except the machine’s control panel. But it’s simple to install it, see installation video as below:
Yes, the package includes all necessary parts, accessories. You will receive everything needed to start your business instantly or your own use.
Distilled water is recommended. Do not use tap water! which contains impurities, resulted in machine’s error.
Regular maintenance is not required. But need to replace water once every two months. And drain water away if you do not plan to use it for a long time.
1. People with heart disease or high blood pressure, or configured cardiac pacemaker.
2. Patients with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
3. People with hemorrhagic disease, trauma or who is bleeding.
4. Pregnant women and child.
5. Medical plastic parts, or artificial parts filling inside.
6. People with metal inside the area to be treated.
7. Patient with skin inflammation or with edema.
8. People with an abnormal immune system.
9. Numb or insensitive to heat.
- One session: 30 mins
- Max. sessions for the same area in one week: 3 sessions
- One course: 12 sessions
- You begin to see results after: 1 course
- Obvious results can be achieved after: 3 courses
We recommend max. 3 treatments on the same area in one week.
It feels like an intensive workout. But you can lay down and relax during the treatment.
It’s non-invasive and requires no recovery time or any pre/post treatment preparation.
The treated area should not contain metal, medical plastic parts or artificial filling parts. The working handpiece should stay far away from the area with metal parts or implants. So if a woman has breast implants, she can still have treatments on other areas, e.g. legs (stomach can not be treated, cause it’s near to breast).
-If a woman is breast feeding after having a baby, she can not be treated with HIEMTPRO.
-If a woman is not breast feeding after having a baby, and if it’s natural childbirth, she has to wait for 1 week for treatment after having a baby. If it’s Caesarean Section, she can not have treatments until wound has been completely healed.
Yes they can be treated on different parts everyday (e.g. do legs Monday, stomach Tuesday, Butt Wednesday). But we recommend max. 3 treatments on the same area in one week.
Below is our advice for your reference:
1 Session MMS (30min & 1 Area): 40 USD / 1 Session
4-Session MMS (30min & 1 Area): 150 USD / 4 Sessions
8-Session MMS (30min & 1 Area): 275 USD / 8 Session
Yes you can do other treatments together with hiemtpro treatment.
If choose auto mode, after set the basic information of patient, e.g. gender, age range, treatment area, you could start the treatment instantly with pre-programmed parameters.
If choose manual mode, you don’t set the basic informations, but need to manually setup all parameters, e.g. intensity, frequency, time.
In a word, Auto mode is easy for operation and Manual mode is preciser.
The machine can work continuously for a whole day. But after about 6 hours continuous working, the handpiece may become heated.
For best results and patient’s experience, better stop working after 6 hours until the system and handpiece’s temperature return to normal.
- Recommend patient to put on bodysuit during treatment.
- Sterilize the handpieces with 75% alcohol after each treatment. Important: Make sure to wipe up the alcohol sprayed on handpiece, cause alcohol may corrode the handpiece.
