Project Description
HIEMT MAX3 – 2021 newest hi emt machine, 50% power increase, 100% performance increase.
Overview
HIEMT MAX3, 4 heads hiemt pro machine, which helps women and men lose fat and gain muscle simultaneously at 6 body parts: abdomen, buttocks, thighs, calves, biceps, triceps.
- Comparing with HIEMT PRO MAX, energy output of HIEMT MAX3 increased by 50%! And its performance increased by 100%!
The hiemt pro comes with air-cooling system, continuous working without failure. No need cooling water any more
Four hi-emt handpieces (2 abdominal handpieces & 2 arms handpieces) work simultaneously with different working intensity for different person or different areas, more profitable
Additionally, purchase the Pelvic Floor Muscles Handpiece to work with the hi-emt machine, for pelvic floor muscles training, postpartum recovery, reproductive health care, Urinary Incontinence treatment, Urine Extravasation treatment, prostate health care
The Start/Pause button on hiemt pro machine’s handpieces for easier operation during treatment
The plug-in type handpieces’ lifespan up to 6000 hours
Dynamic temperature monitoring & lifespan monitoring & fault self-checking
Maximum working frequency up to 135 Hz
100 ~ 240 V wide range of voltages, always working fine all over the world
Designed specially for your salon, spa and clinic
10.2 inches LCD touch screen
2 Working modes: Auto & Manual
Pain-free, Non-surgical, Non-invasive
Supramaximal Magnetic Energy – The high intensity magnetic energy covers big skeletal muscles of the human body, and this high level energy allows musle responds with a deep remodeling of its inner structure
Stronger Stimulation – Double layer coil generates deeper and stronger high intensity electromagnetic effects
High Efficacy – One 30 minutes session equals 30000 sit-ups, gain muscle and lose fat at the same time
Recharging System – hiemt pro emslim machine automatically generates a code, which controls the usage count and time. Used for machine’s rental, cooperative management, membership usage after code purchase
Four HI-EMT Handpieces
Energy output increased by 50%
Design and construction are based on a high level of ergonomy to be user-friendly for patients and doctors
Air-cooling applicators that allows long time operation without any overheat issue. Water is not needed any more.
Four hi-emt applicators to treat all of your concerns
The Start/Pause button on handpiece for easier operation during treatment
Plug-in type connectors for easier removal of handpieces from hi-emt machine
Screen Interface
10.2 inches LCD touchscreen with user-friendly and simple interface
Channel A & B can be separately controlled
11 different pre-built display languages
2 working modes for your choice: AUTO mode for easier operation, MANUAL mode for preciser operation
Pelvic Floor Muscles Handpiece
Patented product
For pelvic floor muscles training, postpartum recovery, reproductive health care, Urinary Incontinence treatment, Urine Extravasation treatment, prostate health care
Weight capacity: 150 kg
Compatible with emt machine: HIEMS MAX4, HIEMS MAX4 Light, HIEMT MAX3, HIEMT MAX3 Light, HIEMT PRO MAX, HIEMT Light PRO
Order separately the pelvic floor muscles handpiece here: https://www.mtsaes.com/shop/hiemt-pelvic-floor-muscles-handpiece/
Connection Instruction
Socket A1, A2, B1, B2 are separately controlled by A1, A2, B1, B2 on screen
If abs handpiece connected with socket A1, abs handpiece controlled by A1 on screen
If arm handpiece connected with socket A1, arm handpiece controlled by A1 on screen
If pelvic floor handpiece connected with socket A1, A2 becomes invalid, pelvic floor handpiece controlled by A
Important: Before connecting or disconnecting some handpiece, make sure to power off emt machine first
Best manual mode settings for optimum results
Muscle Growth:
- Intensity: 100%
- Total working time: 30 mins
- F1: 20 Hz, T1(F1 working time): 2 min
F2: 35 Hz, T2: 3 min
F3: 4 Hz, T3: 1 min
F1, F2, F3: circularly working until reach 30 mins
Muscle Growth and Fat Reduction:
- Intensity: 100%
- Total working time: 30 mins
- F1: 30 Hz, T1: 2 min
F2: 45 Hz, T2: 2 min
F3: 4 Hz, T3: 2 min
F1, F2, F3: circularly working until reach 30 mins
Pelvic:
- Intensity: 100%
- Total working time: 30 mins
- F1: 2 Hz, T1: 1 min
F2: 120 Hz, T2: 1 min
F3: 28 Hz, T3: 4 min
F1, F2, F3: circularly working until reach 30 mins
Treatment parameters may vary based on different patients.
To setup working time for F1~F6, please touch the position of frequency value, as indicated by the yellow arrows.
Technical Specs
| Power | 1700VA |
| Output Power | 0-9 Tesla (+/- 20%) |
| Screen | 10.2 inches LCD touchscreen |
| Display Languages | English, Spanish, Japanese, Italian, French, German, Arabic, Greek, Turkish, Czech, Chinese |
| Pulse Width | 360 µs |
| System Cooling | Air cooling |
| Electromagnetic Coil Diameter | 129 mm |
| Working Mode | Auto, Manual |
| Working Time | 1-30 minutes |
| Working Intensity | 1%-100% |
| Working Frequency | F1 (1-60Hz), F2 (1-135Hz), F3 (1-90Hz) |
| Voltage | 100 – 240 V (wide range) |
| Fuse | FL5*20 T15AL250V (220V), RT28-32(RO15)20A 500V (110V) |
Packing List
| HI-EMT Machine | 1 unit |
| HI-EMT Handpiece | 4 pcs |
| Power Supply Line | 1 pc |
| User Manual | 1 pc |
| Handpieces Frame | 4 pcs |
| Bandage (0.75m), Bandage (1.5m) | 1 set |
| Hexagonal Screw Wrench | 1 pc |
How HI-EMT Works
Powered by MMS technology, HI-EMT machine is based on high-intensity focused electromagnetic energy, penetrates through the skin to target fat layers and the muscle layer, inducing powerful involuntary muscle contractions.
The body’s response to these contractions is to strengthen its muscle fibers, resulting in improved muscle gain and fat lose.
After treatments, abdomen, buttocks, thighs, calves, biceps and triceps are firmer and have a more defined and toned appearance.
Customer Questions & Answers
We offer lifelong technical support and free replacements in warranty of 3 years from the date of purchase, effectively protect your investment.
- Technical solution can be offered asap if any technical problem.
- Free replacement parts can be offered asap if any parts problem, and the replacement parts will 100% resolve the problem.
- If whole machine is broken, we offer complete core for free, machine will be brand new after replacing the core.
We offer videos on how to replace and you can do the job quickly and easily by yourself. We pay for shipping for all replacement parts.
| Muscle Growth | Muscle Growth and Fat Reduction | Pelvic | |
|---|---|---|---|
| Working Intensity | 100% | 100% | 100% |
| Total Working Time | 30 mins | 30 mins | 30 mins |
| Frequency & Time | F1: 20 Hz, T1(F1 working time): 2 min
F2: 35 Hz, T2: 3 min F3: 4 Hz, T3: 1 min F1, F2, F3: circularly working until reach 30 mins |
F1: 30 Hz, T1: 2 min
F2: 45 Hz, T2: 2 min F3: 4 Hz, T3: 2 min F1, F2, F3: circularly working until reach 30 mins |
F1: 2 Hz, T1: 1 min
F2: 120 Hz, T2: 1 min F3: 28 Hz, T3: 4 min F1, F2, F3: circularly working until reach 30 mins |
| **Treatment parameters may vary based on different patients. | |||
To setup the working time for F1~F6, please touch the position of frequency value.
If choose auto mode, after set the basic information of patient, e.g. gender, age range, treatment area, you could start the treatment instantly with pre-programmed parameters.
If choose manual mode, you don’t set the basic informations, but need to manually setup all parameters, e.g. intensity, frequency, time.
In a word, Auto mode is easy for operation and Manual mode is preciser.
Yes, the handpiece is consumables. Lifespan of handpiece up to 6000 hours. So the handpiece is required to be replaced after it’s done.
Yes, the machine can be customized as you prefer:
-Put your logo on front of machine and welcome screen: MOQ(minimum order quantity) is 5 units
-Customize machine color(without changing shape): MOQ is 20 units
-Customize machine shape: MOQ is 50 units
Yes, all the HIEMT beautiful muscle machine have CE certificates, which can be offered any time you need.
100 ~ 240 V wide range of voltages, always working well all over the world.
Yes, the hi-emt machine is packed in standard export plywood case with shockproof sponge protection. See our packing process as below:
The machine will be assembled well except the machine’s head. But it’s simple to install it, see installation video as below:
Yes, the package includes all necessary parts, accessories. You will receive everything needed to start your business instantly or your own use.
The weight capacity of the pelvic floor handpiece is 150 kg. So it’s ok for a woman weighing 120 kg to sit on the handpiece.
Yes, the 4 handpieces can work at the same time if you connected 4 handpieces. But if you connect with the pelvic floor handpiece, only 2 x arm handpieces(or 2 x abs handpieces) and 1 x pelvic floor handpiece can work simultaneously.
If you want only one handpiece to work, connecting only one handpiece with the machine.
The HIEMT beautiful muscle machine can work continuously for a whole day. But after about 6 hours continuous working, the handpiece may become heated.
For best results and patient’s experience, better stop working after 6 hours until the system and handpiece’s temperature return to normal.
1. People with heart disease or high blood pressure, or configured cardiac pacemaker.
2. Patients with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
3. People with hemorrhagic disease, trauma or who is bleeding.
4. Pregnant women and child.
5. Medical plastic parts, or artificial parts filling inside.
6. People with metal inside the area to be treated.
7. Patient with skin inflammation or with edema.
8. People with an abnormal immune system.
9. Numb or insensitive to heat.
30 minute treatment with minimum of 4 sessions scheduled 2-3 days apart.
We recommend max. 3 treatments on the same area in one week.
It feels like an intensive workout. But you can lay down and relax during the treatment.
It’s non-invasive and requires no recovery time or any pre/post treatment preparation.
You begin to feel tangible results right after the treatment. Positive results are usually reported two to four weeks after the last session and continue to improve for several weeks following the treatments.
- Recommend patient to put on bodysuit during treatment.
- Sterilize the handpieces with 75% alcohol after each treatment. Notice: Make sure to wipe up the alcohol sprayed on handpiece, cause alcohol may corrode the handpiece.
The treated area should not contain metal, medical plastic parts or artificial filling parts. The working handpiece should stay far away from the area with metal parts or implants. So if a woman has breast implants, she can still have treatments on other areas, e.g. legs (stomach can not be treated, cause it’s near to breast).
-If a woman is breast feeding after having a baby, she can not be treated with HIEMTPRO.
-If a woman is not breast feeding after having a baby, and if it’s natural childbirth, she has to wait for 1 week for treatment after having a baby. If it’s Caesarean Section, she can not have treatments until wound has been completely healed.
Yes they can be treated on different parts everyday (e.g. do legs Monday, stomach Tuesday, Butt Wednesday). But we recommend max. 3 treatments on the same area in one week.
Below is our advice for your reference:
1 Session MMS (30min & 1 Area): 40 USD / 1 Session
4-Session MMS (30min & 1 Area): 150 USD / 4 Sessions
8-Session MMS (30min & 1 Area): 275 USD / 8 Session
Pelvic floor handpiece’s energy output point is the circle at the center of handpiece. You have to keep moving during treatment until you can feel the muscle contraction.
The machine is air cooling system, it keeps cooling itself during and after treatment, and it makes noise during cooling process. So please wait for a few minutes until the noise disappeared and power off machine.
Yes you can do other treatments together with hiemtpro treatment.
Videos & Brochure & User Manual
Popular Models
Popular Models Comparison
| HIEMT MAX3 | HIEMT MAX3 Light | |
|---|---|---|
| Power | 1700 VA | 1700 VA |
| Max. Output Power | 9 Tesla | 9 Tesla |
| Max. Working Frequency | 135 Hz | 135 Hz |
| Voltage | 100 ~ 240 V | 100 ~ 240 V |
| Handpieces Working Mode | Independently | Independently |
| Recharging System | Built-in | Built-in |
| Pulse Width | 360 µs | 360 µs |
| Electromagnetic Coil Diameter | 129 mm | 129 mm |
| Style | Standing | Portable |
| Software | Professional | Simplified |
| LCD Touchscreen Size | 10.2 inches | 8 inches |
| Display Languages | English, Spanish, Japanese, Italian, French, German, Arabic, Greek, Turkish, Czech, Chinese |
English, Spanish, Italian, Chinese |
| Applicators | 2 abdominal handpieces, 2 arms handpieces, |
2 abdominal handpieces, 2 arms handpieces, |
| Cooling System | Air cooling | Air cooling |
| Start/Pause Button | Available on handpiece | Available on handpiece |
| Handpiece Connector Type | Plug-in | Plug-in |
| Learn more > | Learn more > | |
