This machine comes with 2 working mode: C/H and C. If you choose C/H working mode, by default, the handpiece will be heating for minutes during cooling process.
If you want only cooling during the whole treatment, please touch C/H to switch to working mode C.
If you want heating for 1~3 mins before cooling procedure, and always cooling after that, please choose mode C/H and do as follow:
Advanced setting – Enter code 201709 – Go to section of ‘C=12M’ and adjust the time(minutes) to 45M
C/H: Cooling-heating looping system to prevent skin burning.
C: Cooling all the time.
‘C=12M’: In cooling procedure, heating(lasting 3 mins) enabled after cooling for 12 mins.
‘C=45M’: Heating enabled after cooling for 45 mins. With this setup, it’ll be always cooling until you finished 45-min treatment.